Configuring A Macintosh For A Static Ip Address; Gateway Tab - Windows 98Se And Me - Hughes HN7000S User Manual

Configuring a
Macintosh for a static IP
address
Appendix A • Typical Operating System Settings
90
1037073-0001 Revision E
3. On the
IP Address
automatically radio button.
4. Select the Gateway
selecting them and clicking Remove. See Figure 73.
Figure 73: Gateway tab - Windows 98SE and Me
5. Select the Disable DNS radio button on the
Configuration tab.
6. Click OK to accept the updates for the TCP/IP properties.
7. Click OK to close the list of network components. Windows
may request the installation CD-ROM to complete updating
the TCP/IP settings.
8. Restart the computer even if Windows does not require you to
do so. This ensures that the network settings are
automatically reset.
Follow the steps below to configure a terminal with a static IP
address on a Macintosh system.
1. Select
System Preferences
Systems Preference menu appears.
tab, select the Obtain an IP address
tab. Remove any installed gateways by
from the Mac interface. The
DNS