Defining Port Forwarding Rules; Help Page - Hughes HN7000S User Manual

Defining port forwarding

Help page

Follow these steps to use the Port Forwarding Configuration page
to define port forwarding rules:
rules
1. Open a Web browser on a computer connected to the
HN7700S.
You may also use a computer on the LAN if the HN7700S is
connected to an Ethernet device, such as a hub or router.
2. Type
www.systemcontrolcenter.com
address bar and press E
3. Click Port Forwarding Configuration
Control Center home page or in the left frame of the page you
are currently on.
4. Click Add Rule on the Port Forwarding Configuration page.
See Figure 25.
5. Enter the appropriate values in the following fields:
Server IP Address
Figure 26.
Figure 26: Entering port forwarding rules
6. Click the
appropriate protocol.
7. Click Save Rule.
8. Repeat steps 1 through 7 to define additional rules.
The System Control Center Help page (Figure 27) contains
information to help you get started, a utility to help you optimize
browsing performance, contact information if you need
assistance, and other helpful information. Review the Help page
information to become familiar with the remote terminal.
To display the Help page:
• Click
View Help Topics
page
.
NTER
, , and
Server port
drop-down menu and select the
Protocol Type
on the System Control Center home
Chapter 2 • System Control Center
in the browser's
on the System
Rule ID
. See
Global port
1037073-0001 Revision E
,
31