Using The Terminal Leds To Troubleshoot; Remote Terminal Power And Cable Connections - Hughes HN7000S User Manual

Using the terminal LEDs
to troubleshoot
Chapter 5 • Troubleshooting
56
1037073-0001 Revision E
This section explains how to use LED appearance to
troubleshoot. Refer to Figure 45 for power and cable connections
when completing a troubleshooting procedure.
Power
supply
Receive
cable
Figure 45: Remote terminal power and cable connections
CAUTION
The transmit and receive cable connectors must be
securely tightened.
• Power down the terminal by removing the AC or DC
power from the source - do not remove the power cord
from the terminal. This could shock you and/or damage
the terminal.
• Make sure each connector is properly aligned
(not cross-threaded).
• Finger tight with no connector play is adequate.
Ethernet
cable
AC power
cord
DC power
cord
Transmit
cable
Computer
T0174003