Hn7700S Overview; Hn7700S Enterprise Features - Hughes HN7000S User Manual

HN7700S overview

HN7700S enterprise
Chapter 1 • Introduction
6
1037073-0001 Revision E
terminal IP address and the subnet mask may be required to
configure a network. The System Control Center is described in
Chapter 2 – System Control Center, on page 13.
The HN7700S (Figure 3) is a self-hosted remote terminal
equipped with a serial port, two Ethernet ports, and an internal
modem (with telephone jack) to support the Virtual Private
Network Automatic Dial Backup (VADB) feature. VADB is
designed for enterprise customers.
Phone jack for VADB support
Dual Ethernet ports
The HN7700S remote terminal includes features that make it an
ideal broadband communications solution for enterprise
features
customers. These features are introduced below and then
described in more detail in the following sections.
• VADB – The HN7700S remote terminal includes an internal
modem that supports the Virtual Private Network Automatic
Dial Backup (VADB) feature. VADB enables the HN7700S
to send and receive data over a terrestrial phone line if the
satellite link between the terminal and the Network
Operations Center (NOC) should fail or degrade below an
acceptable threshold.
Serial port
LAN 1
LAN 2
Power connector
SAT IN (receive)
SAT OUT (transmit)
Figure 3: HN7700S remote terminal
These connectors are
present on the HN7700S
only. (The HN7000S has
1 LAN port.)
T0156014