Speakers - HP ZBook 15 G2 Mobile Workstation Maintenance And Service Manual

Speakers

Description
Speakers (includes cable)
Before removing the speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Service cover (see
b. Hard drive (see
c. Optical drive (see
d. Keyboard (see
e. Top cover (see
Remove the speakers:
1. Disconnect the speaker cable (1) from the system board.
2. Remove the two Phillips PM2.0×3.0 screws (1) that secure the speakers to the base enclosure.
3. Remove the speakers (3) and cable.
Reverse this procedure to install the speakers.
80 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 44), and then remove the following components:
Service cover on page
Hard drive on page 46)
Optical drive on page 48)
Keyboard on page 57)
Top cover on page 65)
45)
Spare part number
734292-001