Top Cover - HP ZBook 15 G2 Mobile Workstation Maintenance And Service Manual

Top cover

Description
Top cover (includes TouchPad, TouchPad cable, and TouchPad bracket)
Before removing the top cover, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Service cover (see
b. Hard drive (see
c. Optical drive (see
d. Keyboard (see
NOTE: When replacing the top cover, be sure to remove the following components from the defective top
cover and install them on the replacement top cover:
●
Function button board (see
● Power button board (see
●
Fingerprint reader board (see
Remove the top cover:
1. Close the computer.
2. Turn the computer upside down with the front toward you.
3. Remove the eight Torx T8M2.5×6.5 screws that secure the top cover to the computer.
Battery on page 44), and then remove the following components:
Service cover on page
Hard drive on page 46)
Optical drive on page
Keyboard on page 57)
Function button board on page
Power button board on page
Fingerprint reader board on page
45)
48)
71)
73)
69)
Component replacement procedures
Spare part number
734281-001
65