HP ZBook 15 G2 Mobile Workstation Maintenance And Service Manual page 99

a. Remove the two screw covers (1) and the two Phillips PM2.0×5.5 screws (2) that secure the
display bezel to the display assembly.
The screw covers are available in all LED display assembly subcomponent spare part kits.
b. Flex the inside edges of the top edge (1), the left and right sides (2), and the bottom edge (3) of
the display bezel until the bezel disengages from the display enclosure.
c. Remove the display bezel (4).
The display bezel is available using the following spare part numbers:
734301-001: Models with a webcam
734302-001: Models without a webcam
784471-001: Models with a QHD+ display and a webcam
784472-001: Models with a QHD+ display and without a webcam
784473-001: Models with an Innolux display panel and a webcam
784474-001: Models with an Innolux display panel and without a webcam
Component replacement procedures 91