Table of Contents
Advertisement
4.
Remove the battery (3) from the computer.
To install the battery, reverse the removal procedures.
NOTE:
When replacing the battery, be sure to completely reassemble the computer and plug in the
AC adapter before turning the computer on.
Speakers
To remove the speakers, use this procedure and illustration.
Table 5-3
Speaker description and part number
Description
Speakers (includes left and right speakers, cables, and four rubber isolators)
Before removing the speakers, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the computer (see
Remove the speakers:
1.
Disconnect the speaker cables (1) from the system board.
2.
Remove the four Phillips M2.0 × 2.4 broadhead screws (2) that secure the speakers to the computer.
3.
Remove the speakers (3) from the computer.
NOTE:
The absence of or damage to these isolators can result in degraded speaker performance.
Bottom cover on page
When removing the speakers, make note of the location of the rubber isolator locations (4).
Preparation for disassembly on page
33).
Battery on page
Spare part number
N94802-001
33).
35).
Speakers
37
Advertisement
Table of Contents
