Usb Board - HP ZBook 15 G2 Mobile Workstation Maintenance And Service Manual
Mobile workstation;
Hide thumbs
Also See for ZBook 15 G2 Mobile Workstation:
- Maintenance and service manual (151 pages) ,
- Technical white paper (17 pages)
Table of Contents
Advertisement
2.
Disconnect the audio/USB board (2) from the system board by lifting up on the left side of the audio/
USB board.
3.
Remove the audio/USB board.
Reverse this procedure to install the audio/USB board.
USB board
Description
USB board (includes cable and double-sided adhesive)
Before removing the USB board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
a.
Service cover (see
b.
Hard drive (see
c.
Optical drive (see
d.
Keyboard (see
e.
Top cover (see
Remove the USB board:
78
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page
44), and then remove the following components:
Service cover on page
Hard drive on page
46)
Optical drive on page
48)
Keyboard on page
57)
Top cover on page
65)
45)
Spare part number
734293-001
Hide quick links:
Advertisement
Table of Contents
