Table of Contents
Advertisement
3.
Release the battery (3) by sliding it to the left, and then remove the battery (4) from the computer.
To install the battery, reverse the removal procedures.
NOTE:
When replacing the battery, be sure to completely reassemble the computer and plug in the
AC adapter before turning the computer on.
Speakers
To remove the speakers, use this procedure and illustration.
Table 6-2
Speakers description and part number
Description
Speakers (include left and right speakers, cables, and six rubber isolators)
Before removing the speakers, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
Remove the speakers:
1.
Disconnect the speaker cable (1) from the system board.
2.
Release the speaker cables from the retention clips (2) that are built into the computer.
3.
Remove the six Phillips M2.0 × 2.0 broadhead screws (3) that secure the speakers to the computer.
56
Chapter 6 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
42).
Spare part number
N96463-001
Battery on page
54).
54).
Advertisement
Table of Contents
