Replacements And Installations; Replacing The Lower Housing Assembly; Installing The Lower Housing Assembly; Replacing The Fan Shaft Assembly - Kodak CAROUSEL NEW LOOK PROJECTOR Service Manual

SERVICE MANUAL
Section 1: Replacements and Installations

Replacing the LOWER HOUSING ASSEMBLY

Warning
Dangerous Voltage
[1] Disconnect the main power.
[2] Remove the PROJECTION LENS.
[3] Remove the LAMP MODULE ASSEMBLY.
[4] Remove the 6 Torx SCREWS from the LOWER HOUSING ASSEMBLY.
[5] Pull the LOWER HOUSING ASSEMBLY off the TOP HOUSING.

Installing the LOWER HOUSING ASSEMBLY

[1] Do the replacement procedure for the LOWER HOUSING ASSEMBLY in reverse order.
SCREW (6)
A100_0030HCA
A100_0030HA

Replacing the FAN SHAFT ASSEMBLY

Warning
Dangerous Voltage
[1] Disconnect the main power.
[2] Do the replacement procedure for the LOWER HOUSING ASSEMBLY.
[3] Cut the 3 WIRE TIES:
• 1 on BLOWER COVER wires
• 2 on SMALL CIRCUIT BOARD between the MOTOR and MECHANISM ASSEMBLY
4
LOWER HOUSING
LAMP MODULE
18NOV97 – SM5440-1