Programming (Changing) The Agitation Time - Cornelius IDC 255 PROGATE DRIVE THRU UNIT Installation Manual

The agitation time equals the dispense time multiplied by the agitation ratio. The user is given the flexibility to change
the agitation ratio there by altering the agitation time in order to ensure that the ice chute is always filled with ice for all
the different ice types.

Programming (Changing) the Agitation Time

1. Simultaneously Press and hold for 3 seconds, the
to enter the programming mode.
2. The LED meter turns ON once the programming mode is entered. Visual feedback of ratio/agitation time is
obtained from the visual programming LED.
enabling the user to.
3. Vary the agitation time using the directional arrow buttons. Left to decrease and right to increase.
4. To exit, repeat Step 1.
© 2006-2014, Cornelius Inc.
2
10 12 14 16 18 20 22
Figure 20.
button and also both direction arrow buttons
- 19 -
IDC 255 Progate Drive Thru Installation Manual
26 28
24
The LED meter shows the existing agitation ratio
Publication Number: 621057419INS