Programming (Changing) The Agitation Time - Cornelius IDC 255 Service Manual

IDC 255 Progate Drive Thru Service Manual
Dispense Time (mS)
Dispense Time (mS)
The relationship is expressed below.
Agitation Time (A ) = Dispense Time (D
T
The agitation time equals the dispense time multiplied by the agitation ratio. The user is given the flexibility to
change the agitation ratio thereby altering the agitation time in order to ensure that the ice chute is always filled with
ice for all ice types.

Programming (Changing) the Agitation Time

1. Simultaneously press and hold for 3 seconds, the
to enter the programming mode.
2. The LED meter turns ON once the programming mode is entered. Visual feedback of ratio/agitation time is
obtained from the visual programming LED
ratio enabling the user to vary the agitation time using the directional arrow buttons. Left
and right direction arrow button to increase.
3. To exit, repeat Step 1.
Publication Number: 621057419SER
Agitation Ratio
170 16
190 16
210 16
230 16
Agitation Ratio
50 28
70 28
90 28
110 28
130 28
150 28
170 28
190 28
210 28
230 28
) x Agitation Ratio
T
2
10 12 14 16 18
Figure 5.
- 10 -
Agitation Time (mS)
2720
3040
3360
3680
Agitation Time (mS)
1400
1960
2520
3080
3640
4200
4760
5320
5880
6440
2
(R )
A
20 22 26 28
24
button and also both direction arrow buttons
. The LED meter shows the existing agitation
to decrease
© 2006-2013, IMI Cornelius Inc.