Power Installation; Water Installation; To Access Cold Plate Water Inlets - Cornelius IDC 255 PROGATE DRIVE THRU UNIT Installation Manual

PROGATE CO SHUTOFF
P I
OWER NSTALLATION
The machine is equipped with a 3 Prong plug (hot, neutral, , ground) and is plugged into any standard wall outlet
capable of handling 9.3 amps at 120 volts. The Cord may be wrapped and stored under machine for shipment.
W I
ATER NSTALLATION

To access cold plate water inlets

1. Remove screws holding attaching lower splash panel to frame and slide panel away from the machine.
2. Use Oetker clamps to secure lines to barbed fittings.
Figure 8.
© 2006-2014, Cornelius Inc.
2
Figure 7.
- 11 -
IDC 255 Progate Drive Thru Installation Manual
CO INPUT
2
CARBONATOR FEED
Figure 9.
Publication Number: 621057419INS