Loading Of Lid Dispenser; Plastic Wrapped Lids - Cornelius IDC 255 PROGATE DRIVE THRU UNIT Installation Manual

IDC 255 Progate Drive Thru Installation Manual
L L D
OADING OF ID
IMPORTANT: To assure best operation lids should be replaced when the last lid is below the black
plastic bottom.

Plastic Wrapped lids

1. To remove, grab the lid dispenser lifting and pulling away from the merchandiser.
Figure 12.
2. Get the fresh sleeve of lids and position so that lid
bottom is up.
3. Remove lid dispenser top if present.
4. Tear open bag.
5. Slide sleeve into tube, Pull the plastic from stack, replace top and place lid dispenser back in position on the
merchandiser.
Figure 15.
Publication Number: 621057419INS
ISPENSER
- 14 -
Figure 13.
Figure 14.
Figure 16.
© 2006-2014, Cornelius Inc.