No Ice Dispense In Automatic Mode - Cornelius IDC 255 PROGATE DRIVE THRU UNIT Installation Manual

IDC 255 Progate Drive Thru Installation Manual
N I D
O CE ISPENSE IN

NO ICE DISPENSE IN AUTOMATIC MODE

dispense ice from all the ice
None of the Sizes
Is the green
power light on the
keypad on
Do the
drink valves
operate
No
1. Check key lock out switch.
2. Check transformer for power.
3. Check all electrical connec ons.
Publication Number: 621057419INS
A M
UTOMATIC ODE
Can you
Some sizes
sizes
Is there ice
Yes
present in the ice
chute
No
Does the agitator
work when the green push
bu on is pressed
No
1. Check the red LED on the E-Box pc board.
2. Ensure that relay 2 in the E-box is ac
1. Check the connector
Yes
between the control
box and the E-Box.
1. Check all conne ns to
por on control pc board
Check for proper air
pressure going to the ter
Yes
regulator in the E- Box
(35PSI or greater)
1. Ensure that the ice maker
is func oning properly.
Yes
2. Check ice in hopper
ensuring that it is loose
ted
Yes
Does manual mode
work
No
1. Check magn
2. Check for magnet in chute cover.
3. Validate magnet distance from ice chute
Is ice
chute switch Yes
4. Check ice chute disable switch.
disabled
5. Ensure that relay 1 is ac vated.
6. Check transformer power output to
No
1. Relay 1 in the E-Box should
be a ated by small post on
the side of the relay being
retracted
- 30 -
1. Check the connector between the
control box and the E-Box.
2. Check terminals 6 and 8 on relay
3 in the E-Box.
3. Check the pneuma solenoid
Yes
Is the air
pressure to the lter
regulater above
35PSI
No
1. Check air supply shut
Box.
o outside the E-
2. Check air supply to
the unit.
3. Check gate cylinder
for free movement.
1. Check mode selector switch.
2. Ensure relay 2 is a ated.
switch in chute housing.
disable switch.
control circuit
© 2006-2014, Cornelius Inc.