Progate 2 Features; Progate Portion Ice Control Features; Lid Dispenser; Straw Holder - Cornelius IDC 255 Service Manual

IDC 255 Progate Drive Thru Service Manual
PCX OUT OF RATIO LABEL
Electrical Connections: 6 ft long power cord with 3-prong plug attached to dispenser.
Power Requirements: 9.3 amps at 120 volts dedicated power supply.
Water Supply Requirements: 100 psi (7 bar) maximum static pressure 40 psi (28 bar) minimum dynamic pres-
sure. 3/8" minimum water line recommended.
CO Requirements: 100 psi max to unit regulated to 35 psi (2.4 bar) to Progate 2 ice gate system, 75 psi (5.2 bar)
2
carbonator.
P 2 F
ROGATE EATURES

Progate Portion Ice Control Features

• 4 Programmable ice dispense sizes
• Automatic/Manual Ice Dispense Modes
• Unit Power On/Off Switch
• Programmable Agitation Time

Lid Dispenser

• 4 lid dispenser locations on the unit
• 3 Separate removable lid dispensers for small/medium, large, and extra large lids

Straw Holder

• Holds up to 140 regular sleeved straws
L H C
ID OLDER OMPATIBILITY
The following template is a guide to validate the compatibility of the cup lids that are used with the IMI Cornelius Lid
Dispensers supplied with the IDC255 Progate Ice Drink Dispenser. The lid dispensers accommodate small lids
3.75" in Dia. ± .032" in the large lid dispensers. The templates below are to scale to check the lids or compatibility.
Publication Number: 621057419SER
30.000
Figure 1.
39.750
20.756
CORNELIUS
LOGO
- 4 -
36.901
UNIT
SERIAL NUMBER
© 2006-2013, IMI Cornelius Inc.