Answering system
Answering system settings
Remote access code
To access your answering system remotely from any touch-
tone phone, you need to enter a two-digit number (00-99).
By default, the remote access code is 19.
To change the remote access code:
Using a cordless handset or the telephone base:
1. When the handset or telephone base is in idle mode,
press MENU/
2. Press q
or p
CID
press
/�ELECT.
MENU
3. Press q
or p
CID
press
/�ELECT.
MENU
4. Press q
or p
CID
/�ELECT.
MENU
5. Use the dialing keys to enter a
/DELETE on the handset or X/DELETE on the
MUTE
telephone base to backspace and delete a digit.
6. Press
/�ELECT to save the setting. You hear a
MENU
confirmation tone.
to enter the main menu.
�ELECT
to scroll to Answering sys, then
DIR
to scroll to Ans sys setup, then
DIR
to scroll to Remote code, then press
DIR
two-digit number. Press
87
Play messages
>Answering sys
Answer ON/OFF
>Ans sys setup
REMOTE CODE
19
Play messages
>Answering sys
p
q
Voice guide
>Ans sys setup
p
q
REMOTE CODE
19