Caller Id Announce - AT&T CL83114 Complete User's Manual

Telephone settings
Handset settings

Caller ID announce

The caller ID announce feature lets you know who's calling
without having to look at the display. When you have an
incoming call, the handset and/or base speaks "Call from..."
and the name of the caller based on the directory or caller
ID information. If the caller's name is private or unknown, the
phone number up to the last 11 digits will be announced.
If the caller's phone number is also private or unknown, no
information will be announced. The default setting is On.
To turn on or off the caller ID announce feature:
1. Press MENU/
2. Press q or
CID
/�ELECT.
MENU
3. Press or
q
CID
/�ELECT.
press
MENU
4. Press or
q
CID
�et all On/Off - Change the setting for the base and all handsets.
•
• Local handset - Change the setting for that handset only.
Base - Change the setting for the telephone base only.
•
5. Press or
q
CID
There is a confirmation tone and the screen returns to the previous menu.
If you change the setting to �et all On/Off, the screen shows
CID Annc ON/OFF on all H� & B�.
NOTES:
• To use the caller ID announce feature, you must subscribe to caller ID service from your
telephone service provider.
• If you have paired an AT&T TL80133 DECT 6.0 cordless speakerphone to the telephone base,
the caller ID announce setting for all devices also applies to the speakerphone. When the setting
is On, the speakerphone speaks "Call from..." and the name of the caller based on the directory
or caller ID information during an incoming call. If the caller's name is unavailable, the phone
number up to the last 11 digits will be announced.
• When there are up to five handsets registered, the telephone system supports caller ID announce
for all handsets. If six or more handsets are registered, the system supports caller ID announce for
the first four registered handsets only.
• This feature does not announce information for call waiting calls.
• It takes at least two rings for the phone to receive caller ID information and announce it. If the
phone is answered before the end of the second ring, the phone won't have time to announce
the caller's information.
• Pronunciation of names may vary with this feature. Not all names may be pronounced correctly.
• Caller ID announce is available in English only.
in idle mode to enter the main menu.
�ELECT
to scroll to �ettings, then press
p
DIR
to scroll to Caller ID annc, then
p
DIR
to highlight the desired option, then press
p
DIR
to highlight On or Off, then press
p
DIR
17
LCD language
>Caller ID annc
CALLER ID ANNC
>Local handset
HS CID ANNOUNCE
>On
/�ELECT.
MENU
/�ELECT.
MENU