Add A Call Block Entry - AT&T CL83114 Complete User's Manual

Call block
Call block

Add a call block entry

1. When the telephone base is in idle mode, press MENU
2. Press q or p
CID
3. Press /�ELECT to choose Block list.
MENU
4. Press q or p
CID
/�ELECT.
press
MENU
5. Use the dialing keys to enter a telephone number
(up to 30 digits) when prompted.
Press q
•
CID
or right.
Press X/DELETE to erase a digit.
•
Press and hold X/DELETE to erase all digits.
•
• Press and hold
second dialing pause (a p appears).
-OR-
Copy a number from the redial list by pressing REDIAL/
p , or pressing REDIAL/
DIR
/�ELECT to copy the number.
Press
MENU
6. Press /�ELECT to move on to the name.
MENU
• The display shows Number already saved if the number is already in
the call block list. You cannot save the same number twice.
7. Use the dialing keys
prompted. Press a key repeatedly until the desired character shows on
the screen.
Press q
•
CID
• Press 0 to add a space.
Press X/DELETE to erase a character.
•
Press and hold X/DELETE to erase all characters.
•
• Press TONE
8. Press /�ELECT to store your call block entry.
MENU
to scroll to Call block, then press
DIR
to scroll to Add new entry, then
DIR
or p
to move the cursor to the left
DIR
/�AU�E to enter a three-
REDIAL
�AU�E
keys to enter a name (up to 15 characters) when
or p
to move the cursor to the left or right.
DIR
to change the next letter to upper or lower case.
repeatedly to locate the number.
76
.
/�ELECT
/�ELECT.
MENU
Caller ID log
>Call block
p
q
>Block list
Calls w/o num
p
q
Review
>Add new entry
p
q
, then q
�AU�E
,
CID