History; Feedback - TANDBERG Gatekeeper User Manual

TANDBERG Gatekeeper User Manual

14.4 History

The history root command, xhistory, is used to display historical data on the Gatekeeper.
To list all xhistory commands type:
xhistory ?
To list all history data, type:
xhistory
To show a specific set of history data, type:
xhistory <name>
xhistory calls
xhistory calls call <n>
Displays history data for up to the last 255 calls handled by the Gatekeeper. Call entries are
added to the Call History on call completion. Call histories are listed in reverse chronological
order of completion time.
xhistory registrations
xhistory registrations registration <n>
Displays history data for up to the last 255 registrations handled by the Gatekeeper. Registration
entries are added to the Registration History on unregistration of H.323 entities. Registration
histories are listed in reverse chronological order of unregistration time.

14.5 Feedback

The feedback root command, xfeedback, is used to control notifications of Events and Status
changes on the Gatekeeper.
A Feedback Expression describes an interesting event or change in status. When a Feedback
Expression is registered, a notification will be displayed in the shell for each occurrence of the
event described by that Expression. Notifications will continue to be displayed for a given event
until the Expression is deregistered.
To list all xfeedback commands type:
xfeedback ?
To list all currently active feedback expressions, type:
xfeedback list
To register a feedback expression, type:
xfeedback register <expression>
To deregister the feedback expression with index ¡n¿, type:
xfeedback deregister <n>
To deregister all feedback expressions, type:
xfeedback deregister 0
74