TANDBERG Gatekeeper User Manual page 79

Tandberg gatekeeper user manual

Hide thumbs Also See for Gatekeeper:

Table of Contents

TANDBERG Gatekeeper User Manual

xconfiguration Zones Zone [1..100] HopCount:

Speciﬁes the hop count to be used when originating an LRQ.

xconfiguration Zones Zone [1..100] Monitor:

If zone monitoring is enabled, an LRQ will be periodically sent to the zone gatekeeper. If it fails

to respond, that gatekeeper will be marked as inactive.

xconfiguration Zones Zone [1..100] Match [1..5] Mode:

The zone match mode determines when an LRQ will be sent to gatekeepers in the zone. If the

mode is set to AlwaysMatch the zone will always be queried. If the mode is set to PatternMatch,

the zone will only be queried if the alias queried for matches the corresponding pattern. If the

mode is set to Disabled the zone will never be queried.

xconfiguration Zones Zone [1..100] Match [1..5] Pattern String:

The pattern to be used when deciding whether or not to query a zone. This is only used if the

zone's match mode is set to AlwaysMatch.

xconfiguration Zones Zone [1..100] Match [1..5] Pattern Type:

Determines whether the pattern string being checked should appear at the beginning or end of

an alias.

xconfiguration Zones Zone [1..100] Match [1..5] Pattern Behaviour:

Determines whether the matched pattern should be removed from the alias before an LRQ is

sent to the indicated zone.

<count>

Table of Contents