Introduction - TANDBERG Gatekeeper User Manual

1 Introduction

This User Manual is provided to help you make the best use of your TANDBERG Gatekeeper.
The main features of the TANDBERG Gatekeeper are:
IPv4 and IPv6 support
Supports up to 100 neighboring zones.
Flexible zone configuration with prefix and suffix support.
Secure firewall traversal of any firewall or NAT when used in conjunction with a TANDBERG
Border Controller.
Supports up to 2500 registered endpoints.
Up to 500 concurrent calls.
Up to 100 traversal calls in conjunction with a TANDBERG Border Controller.
URI and ENUM dialing with DNS enabling global connectivity.
Can be used to control the amount of bandwidth used both within the Gatekeeper zone
and to neighboring Border Controllers and Gatekeepers.
Can limit total bandwidth usage and set maximum per call bandwidth usage with automatic
down-speeding if call exceeds per-call maximum.
Can be managed with TANDBERG Management Suite 11.0 or newer, or as a standalone
system with RS-232, Telnet, SSH, HTTP and HTTPS.
Embedded setup wizard on serial port for initial configuration.
Note that features may vary depending on software package.
TANDBERG Gatekeeper User Manual
1