Power Connection And Hazardous Voltage - TANDBERG Gatekeeper User Manual

TANDBERG Gatekeeper User Manual
Dust
Do not operate the apparatus in areas with high concentration of dust.
Vibration
Do not operate the apparatus in areas with vibration or place it on an unstable surface.

Power connection and Hazardous voltage

The product may have hazardous voltage inside. Never attempt to open this product, or
any peripherals connected to the product, where this action requires a tool.
This product should always be powered from an earthed power outlet.
Never connect attached power supply cord to other products.
In case any parts of the product has visual damage never attempt to connect mains power,
or any other power source, before consulting service personnel
The plug connecting the power cord to the product/power supply serves as the main
disconnect device for this equipment. The power cord must always be easily accessible.
Route the power cord so as to avoid it being walked on or pinched by items placed upon or
against it. Pay particular attention to the plugs, receptacles and the point where the cord
exits from the apparatus.
Do not tug the power cord
If the provided plug does not fit into your outlet, consult an electrician. Never install cables,
or any peripherals, without first unplugging the device from it's power source.
Servicing
Do not attempt to service the apparatus yourself as opening or removing covers may
expose you to dangerous voltages or other hazards, and will void the warranty. Refer all
servicing to qualified service personnel.
Unplug the apparatus from it's power source and refer servicing to qualified personnel
under the following conditions:
– If the power cord or plug is damaged or frayed.
– If liquid has been spilled into the apparatus.
– If objects have fallen into the apparatus.
– If the apparatus has been exposed to rain or moisture
– If the apparatus has been subjected to excessive shock by being dropped.
– If the cabinet has been damaged.
vi