Connecting Machine To Power Source - Singer Sewing Machine Instruction Manual

1
a
b
2
A
3
GB

Connecting machine to power source

Connect the machine to a power source as illustrated. (1)
This appliance is equipped with a polarized plug which must be used
with the appropriate polarized outlet. (2)
Attention:
Unplug power cord when machine is not in use.
Foot control
The foot control pedal regulates the sewing speed. (3)
Attention:
Consult a qualified electrician if in doubt as to connect machine to
power source.
Unplug power cord when machine is not in use.
The foot control must be used with the appliance by KD-1902 (110-
120V area)/ KD-2902 (220-240V area) manufactured by ZHEJIANG
FOUNDER MOTOR CORPORATION LTD. (China)
4C-326G (230V area)
Ltd.
Sewing light
Press main switch (A) for power and light on " l ".
IMPORTANT NOTICE
For appliance with a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug is intended to fit
in a polarized outlet only one way. If it does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician
to install the proper outlet. Do not modify the plug in any way.
a. Polarized attachment plug
b. Conductor intended to be grounded
10
manufactured by Wakaho Electric Ind. Co.,