Setting User Login Policies - NETGEAR ProSafe FVS336Gv2 Reference Manual

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336Gv2 Reference Manual
2. Click Add. The Add User screen is displayed.
3. Configure the following fields:
a. User Name. Enter a unique identifier, using any alphanumeric characters.
b. User Type. Select either Administrator, SSL VPN User, or IPsec VPN User.
c. Select Group. Select from a list of configured groups. The user will be associated
with the domain that is associated with that group.
d. Password/Confirm Password. The password can contain alphanumeric
characters, dash, and underscore.
e. Idle Timeout. For an Administrator, this is the period at which an idle user will be
automatically logged out of the Web Configuration Manager.
4. Click Apply to save and apply your entries. The new user appears in the List of Users
table.

Setting User Login Policies

You can restrict the ability of defined users to log into the Web Configuration Manager. You
can also require or prohibit logging in from certain IP addresses or using particular browsers.
To configure user login policies:
1. In the Action column in the List of Users table, click Policies adjacent to the user
policy you want to configure. The Login Policies screen is displayed.
2. To prohibit this user from logging in to the VPN firewall, select the Disable Login
checkbox.
Chapter 7: Managing Users, Authentication, and Certificates | 121