Mercedes-Benz COMAND control unit Operator's Manual page 87

or
X
If COMAND is switched on again or the
engine is restarted.
X
To set the volume of the
announcements: Set the volume during
the automatic announcement .
or
X
Call up an announcement manually using
Navi£6 and adjust the volume.
Canceling Route Guidance
X
In the map display with the menu system
displayed select Destination£Cancel
Route Guidance.
Resuming Route Guidance
X
Select Destination£Continue Route
Guidance in map view with the menu
system displayed.
COMAND calculates the route.
Detour Function
i The Detour function blocks a route
segment ahead. You can set the length of
the block. COMAND calculates a detour
route if possible.
X
Select Route£Detour in map view with
the menu system displayed .
X
To set the length of block: Select
Longer or Shorter repeatedly until the
required length is set.
The blocked segment is highlighted in red/
white on the map. Shown at the top of the
display is the length of the blocked
segment and the route segment to which
the block goes.
X
To cancel the function: Select Back.
X
To start route calculation: Select Start,
see also .
X
To change a block: Select Navi£Route
£Detour£Change.
i If a block already exists, the message
Detour Already Set is displayed. You
can then change or delete this.
X
Then set length of block.
X
To delete block: Select Navi£Route
£Detour£Delete.
i
If a block already exists, the message
Detour Already Set is displayed. You
can then change or delete this.
Alternative Route
i You can have other routes calculated for
the original route guidance using the
Alternative Route function.
X
In the map display with the menu system
displayed select Route£Alternative
Route.
The display is split into two halves. On the
left is the map, which displays one or more
alternative routes between the start and
the destination. The current route is
highlighted in dark blue, other alternative
routes are light blue.
The right side of the display shows
information on the active alternative route,
e.g. length of the segment and the
estimated time of arrival.
X
To select next or previous alternative
route: Select Next or Previous.
The selected route is now highlighted in
dark blue.
X
To return to the original route guidance:
Select Back.
X
To start route guidance with the
selected alternative route guidance:
Select Start.
Route Guidance
Z
85