Mercedes-Benz COMAND control unit Operator's Manual page 80

POI Input
78
After you have selected the entry with the Z
symbol the next display includes the Zagat
ratings.
ZAGAT Ratings
1
Display details
2
X
To see description: Select Details.
ZAGAT example description
Entering a POI via the Map
i If the crosshairs are visible on the map,
you can enter POIs in the vicinity of the
crosshairs. If the crosshairs are not visible,
you can enter POIs in the vicinity of the
current vehicle location.
X
In the map display with the menu system
page 54) select Guide.
displayed ( Y
POIs are available:
Depending on the map scale selected, POI
symbols are displayed on the map. The
scale starting at which symbols are
displayed on the map varies from symbol
to symbol.
You can select which symbols COMAND
should display ( Y page 56). The POI nearest
to the center of the screen is selected
automatically.
No POIs available:
A corresponding message is displayed.
i This message is also displayed if the menu
item No Symbols under Map Display has
been selected ( Y page 56).
X
To confirm message: Press 9.
Information about the highlighted POI
1
Highlighted POI
2