Mercedes-Benz COMAND control unit Operator's Manual page 136

CD Audio/DVD Audio/MP3
134
i Only insert a CD after COMAND has
prompted you to do so with this message.
Only insert one CD per magazine
compartment.
X
Insert a disc into the slot with the printed
side facing upwards.
You see the Please wait... message.
Once the disc is loaded, the DVD changer
switches to the next empty compartment.
You see these messages: Please wait
and then Please insert disc <x>.
X
Repeat the step until all compartments are
loaded.
The DVD changer plays the last disc you
loaded if it has been inserted correctly and
if it is a permissible type.
If loading is not completed, COMAND plays
the first disc inserted.
X
To end loading procedure: Press the Load
V button again.
or
X
Select Back.
or
X
Press the k button.
Loading SD Memory Card
i COMAND does not support the SD card
format "SD-HC 2.0 Standard". Memory
cards with over 2 GB of storage capacity
are not supported. Not all SD memory
cards and storage media are designed for
the temperatures which may be reached in
the vehicle.
Due to the wide range of SD memory cards
available on the market, playback cannot
be guaranteed for all brands of SD memory
card.
X
Push the SD memory card into the slot.
The end with the contact must point
towards the slot.
COMAND loads the memory card and
displays the message Reading Memory
Card. If no MP3 tracks can be found, a
message will be displayed.
Ejecting CDs and DVDs
G
Warning
Only eject a disc when the vehicle is
stationary. You may otherwise be distracted
from the traffic conditions and could cause an
accident.
i If you eject a disc while another is being
played, the DVD changer interrupts
playback. Playback will continue once the
disc has been ejected completely.
Ejecting One Disc
X
Press Eject button V.
The magazine menu appears. The magazine
compartment containing the current disc is
highlighted.
Magazine compartment occupied,
1
ejecting possible
Disc type
2
Disc name (only if stored on disc)
3
Current disc
4
X
To select occupied magazine
compartment: Press ; or =.
X
Press 9.
The Ejecting disc <x>... message
appears. Then you see the following
message: