Mercedes-Benz COMAND control unit Operator's Manual page 35

X
To change the setting: Press 9
or : until the desired treble and bass
levels are set.
X
To save setting: Press 9.
The setting is stored and the menu is
exited.
X
To exit the menu without changes: Press
the k ; or = button.
Setting Balance and Fader
The balance determines whether the sound
intensity is higher on the driver's side or on
the front passenger's side.
The fader determines whether the sound
intensity is higher in the front or in the rear of
the vehicle.
X
Select Sound£Bal/Fad (balance/fader).
Setting Balance and Fader (display image may
differ depending on model)
Current setting
1
X
To change setting: Press
9, :, ; or =until the balance
and fader are set as desired.
X
To save setting: Press the 9 button.
The setting is stored and the menu is
exited.
X
To exit menu without changes: Press the
k button.
Basic Functions of COMAND
Surround Sound
Your vehicle is equipped with the harman/
®
kardon LOGIC7 Surround Sound system.
You can select between LOGIC7
LOGIC7 ® on.
harman/kardon LOGIC7
available for the following operating modes:
Radio (FM only)
R
HD Radio
R
SatRadio
R
CD Audio
R
DVD Audio (MLP, DTS, PCM and Dolby
R
Digital audio formats)
MP3 (including SD memory card)
R
AUX
R
DVD Video (PCM, DTS and Dolby Digital
R
audio formats)
i As some DVDs contain both stereo and
multi-channel audio formats, it may be
necessary to set the audio format
( Y page 141).
®
i The LOGIC7 on function of the harman/
®
kardon LOGIC7 Surround Sound system
allows playback of discrete 5.1 and stereo
recordings with an optimum surround
sound experience for each passenger. It
enables optimum playback of music and
films on CD or audio and video DVDs with
high-resolution surround formats, such as
MLP, DTS or Dolby Digital. For ideal sound
perception from all seats, LOGIC7
distributes the 5.1 surround information
over the 12-channel architecture. This
results in sound characteristics like those
intended by the sound engineer when the
original was recorded.
harman/kardon LOGIC7
two-channel stereo sound source into
multi-channel surround sound. LOGIC7
reads the surround information stored
during the original recording and
®
off and
®
Surround Sound is
®
®
converts each
®
Z
33