Mercedes-Benz COMAND control unit Operator's Manual page 130

Satellite Radio
128
The SatRadio menu appears.
Entering a Channel Number Directly
X
Select SatRadio£Enter Channel in the
SatRadio menu.
An input dialog appears.
or
X
Press l on the control unit.
X
To enter a channel: Press corresponding
number buttons on the control unit.
COMAND will tune to the channel entered.
i You can only select numbers that are
currently permissible.
Selecting a Channel from the SatRadio
Channel List
X
Select SatRadio£Channel List in the
SatRadio menu.
The channel list appears.
X
To select a channel: Press 9 or :.
X
To tune to the selected channel:
Press 9.
Memory Functions
i There are 10 presets available.
You can use the following functions:
Saving channels manually
R
Selecting a channel from the Satellite
R
preset memory
Storing Channels Manually
X
Press 9 if the main area is highlighted.
or
X Select Presets on the SatRadio submenu
bar.
In both cases, the channel memory will
appear. The dot R in front of a preset
indicates that the currently tuned channel
is stored there.
Station Memory
X
To select a preset: Press 9 or :.
X
To store a channel to a selected preset:
Press and hold 9 until a signal tone
sounds.
or
X
Press and hold a number key, e.g. 4, until
a signal tone sounds.
The channel is stored.
Storing via Autostore
i The function automatically assigns
receivable channels to the presets. The
channels which were stored in the channel
memory manually will be overwritten in this
process.
X
Press 9 when the main area is active.
X
Select Autostore.
or
X
Select Presets £Autostore from the
SatRadio submenu.
COMAND searches for receivable
channels. A corresponding message is