Mercedes-Benz COMAND control unit Operator's Manual page 182

Aux Operation
180
To select an action: Press ∆, ∇, \ or Y
X
on the remote control.
X
To trigger an action: Press 9 on the
remote control.
A menu appears and the first entry,
Select, is highlighted.
X
Press 9 on the remote control.
Aux Operation
i You can connect two external video
sources to the display screens (Display
Aux) and additionally one video source to
the DVD drive (Drive Aux).
For further information on external video
sources please refer to the operating guide
of the device.
Connecting an Aux Source
Drive Aux
The Aux connectors of the drive are beside
the Eject button on the front panel of the DVD
drive .
Display Aux
The display Aux jacks are located on the side
of the screen .
Connecting an Audio or Video Source
X
Insert the audio jacks for the left and the
right signal into the respective connectors
labeled L and R.
X
Insert the video jack (yellow) into the
connector with the V label.
Switching to Aux Mode
Disk Drive Aux
X
Select Aux.
The Aux menu appears.
Aux menu
X
Select Source £ Drive Aux.
The video source is played if it is connected
to the drive and in playback mode. If there
is no video picture available, an Audio menu
appears.
i For operating the external video source
please refer to the operator's guide of the
device.
Display Aux
X
Select the display screen to which the
external source is connected.
X
Select Aux.
X
Select Source £ Display Aux.
The video source is played if it is connected
to the screen and in playback mode. If there
is no video picture available, an Audio menu
appears.
Selecting an Active COMAND Source
X
Select Aux.
X
Select Source £ COMANDAudio or
COMANDVideo.
COMAND Audio: The Audio mode to which
COMAND is set is also played by the RSE
system.