Mercedes-Benz COMAND control unit Operator's Manual page 61

X
To confirm the message: Press 9.
i
In order to be able to continue using the
"Save off-road route" function, you should
delete the route memory afterwards.
X
Show the menu system, if necessary
( Y page 54).
X
Select Navi£Save Off-road Route
£Off-road Route Memory.
A bar shows the memory usage as a
percentage.
i When the memory is completely full, you
cannot select the Route memory menu
item.
Deleting the Route Memory
X
Show the menu system, if necessary
( Y page 54).
X
Select Navi£Save Off-road Route
£Delete Off-road Route Memory.
A query appears asking whether the memory
should be deleted.
X Select Yes or No.
If you select Yes, the memory is deleted.
Information on Map
You can have map information displayed at
the bottom edge of the screen during route
guidance.
X
To set: Display menu system if applicable
( Y page 54).
X
Select Navi£Information On Map.
A dot R indicates the current setting.
X
Select Arrival Time/Distance or
Current Street or Geo-coordinates or
None.
X
To exit menu: Press = or ;.
X
Hide menu system if applicable
( Y page 54).
Time of Arrival/Distance to Destination
Map with display activated for time of arrival/
distance
Symbol for destination
1
Distance to the destination
2
Symbol for estimated time of arrival
3
Estimated time of arrival
4
i This display can only be seen during route
guidance. In the Move Map function you will
see other data depending on the crosshairs
position, for example a street name if the
digital map supports this data.
Introduction
Z
59