Mercedes-Benz COMAND control unit Operator's Manual page 72

Destination Input
70
Accepting first list entry
R
Canceling an entry
R
Switching to the list without predictive
R
speller
proceed as described under "City list with
predictive speller" (
Switching to the Destination Memory List
Without Predictive Speller
If there are several entries in the destination
that have similar spellings, d is
highlighted.
X
Press 9.
You can switch to the list at any point while
entering characters.
X
Press 9 repeatedly until the list appears
without the speller.
or
X
Select d and press 9.
If COMAND can match the characters
entered definitively to one entry, the list
appears automatically without the predictive
speller.
Destination Memory List without
Predictive Speller
X
To select a destination: Press 9
or :.
X To cancel selection: Select Back and
press 9.
or
X
Press the k button.
Y page 62).
X
To confirm selection: Press 9.
X
To start route calculation: Select Start.
Entering Destination from the Last
Destinations
X
If necessary switch to navigation mode and
display menu system (
X
Select Destination£From Last
Destinations.
Last destination
1
X
To select a destination: Press 9
or :.
X
To confirm selection: Press 9.
X
To start route calculation: Select Start.
i
For more information on the "Last
Destinations" memory go to
( Y page 94).
Entering Destination via the Map
i In some countries, entering destinations
via the map is not possible at vehicle
speeds above apprx. 3 mph. The function
becomes available again as soon as the
speed falls below apprx. 2 mph.
Using the destination entry via the map,
you can also enter a destination that lies
within the digital map but whose address
data is not included in the digital map.
Y page 54).