Mercedes-Benz COMAND control unit Operator's Manual page 57

Current vehicle location
1
Crosshairs
2
Information on crosshairs position
3
Set map scale
4
i The display item 3 may for example be
a road if corresponding data is available in
the digital map and Current Street is
activated. Or it displays the geo-coordinate
position of the crosshairs if Geo-
coordinates display is activated
Y
( page 60).
Saving Crosshairs Position as Destination
in the last Destinations
X
To display menu system if applicable:
Press 9.
X
To save: Select Position£Save
Crosshair Position.
COMAND saves the crosshairs position as
a destination in the last destinations
memory ( Y page 94). A window appears
containing a corresponding message.
Hiding Crosshairs
X
Press the k button.
The crosshairs disappear and the map is
set to the vehicle location.
or
X
Set the map to the vehicle location, see
description below.
Setting Map to Vehicle or Destination
Location
i If you have moved the map, you can
quickly move the map to the vehicle or
destination location using this function. It
is only possible to set it to the destination
location when route guidance is active.
X
To display menu system if applicable:
Press 9.
X
To set map to vehicle location: Select
Position£Vehicle Position Map.
This hides the crosshairs.
or
X
Press the k button if the crosshairs are
displayed.
This hides the crosshairs.
X
To set the destination location: Select
Position£Destination Position
Map.
The crosshairs position is then set to the
destination.
Basic Settings
You can perform the settings listed below
with route guidance inactive or active.
Map Display
Map Orientation
Currently set map orientation
1
The following displays are possible:
Introduction
Z
55