Mercedes-Benz COMAND control unit Operator's Manual page 70

Destination Input
68
List entry that best matches the
1
characters already entered
List
2
Predictive speller
3
i In the predictive speller 3 you can only
select characters that are currently
available. The set of characters that is
available depends on those already entered
and the data for the digital map.
For the steps of
Entering characters
R
Deleting an entry
R
Accepting first list entry
R
Canceling an entry
R
Switching to the list without predictive
R
speller
proceed as described under "City list with
predictive speller" (
Junction List Without Predictive Speller
Y page 62).
X
To select a junction: Press 9
or :.
X
To cancel selection: Select Back and
press 9.
or
X
Press the k button.
X
To confirm selection: Press 9.
After the confirmation, the Enter
Destination menu appears again. COMAND
has accepted the selected junction and
entered it automatically in the Enter
Destination menu.
Now you can start the route calculation
( Y page 68).
Starting Route Calculation
i Route calculation can only be started
once all the necessary address data has
been entered.
X
In the Enter Destination menu select
Start.
Destination
1
Starts route calculation and then starts
2
route guidance
If route guidance is not active yet, the route
calculation is started.
If route guidance is already active, you will be
prompted to confirm that route guidance
should be ended.