Specifying The Ipp Settings - Konica Minolta bizhub 751 User Manual

Installation on Macintosh computers
6
Adding a printer
1
2
3
4
5
6

Specifying the IPP settings

Specifying the TCP/IP setting for this machine
Specify the IP address of this machine.
!
IPP setting for this machine
Enable IPP print in the IPP Setting screen of this machine.
!
Specifying the TCP/IP setting for the computer
Specify the TCP/IP setting for the Macintosh computer connected to this machine.
1
IC-208
Downloaded From ManualsPrinter.com Manuals
Click the close button at the upper left corner of the dialog box.
– When the "Apply configuration changes?" message appears, click the [Apply] button.
Select "HDD" - "Applications" - "Utility" where the driver was installed, and then double-click "Printer
Setup Utility" or "Print Center" to open it.
When the Add Printer dialog box appears, click the [Add] button. When the printer list appears, click
the [Add] button.
– If available printers have already been set up, the Add Printer dialog box does not appear.
Select "IP Printing" for the connection method.
For OS 10.3, from "Printer Type", select "LPD/LPR".
In "Printer Address", enter the IP address of this machine.
Select "KONICA MINOLTA" in "Printer Model", select the desired model from the list of model names,
and then click the [Add] button.
If the selected printer is registered in the printer list, the setting procedure is completed.
Detail
For details on specifying the IP address of this machine, refer to the User's Guide [Network
Administrator].
Detail
For details on the IPP settings of this machine, refer to the User's Guide [Network Administrator].
On the "Apple" menu, select "System Preferences".
5
5-12