Manual installation using the Add Printer wizard
Printer driver installation using the "Add Printer Wizard"
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
IC-208
Downloaded From ManualsPrinter.com Manuals
Reminder
When installing on Windows 2000, administrator permissions are required.
Insert the Driver CD into the CD-ROM drive of the computer.
Click the [Start] button, point to "Settings", and then click "Printers".
Double-click "Add Printer".
The Add Printer Wizard starts.
Follow the on-screen instructions.
In the dialog box for specifying the connection method, select "Local printer", and then click the [Next]
button.
–
Clear the "Automatically detect and install my Plug and Play printer" check box.
The Select a Printer Port dialog box appears.
Click "Create a new port", and select "Local Port" for "Type of port:"
Click the [Next] button.
In the "Port Name" box, enter "\\NetBIOS name\print service name".
–
Enter the same NetBIOS name and print service name those appear in "Print Setting" in the SMB
Setting screen of this machine.
Click the [OK] button.
The Add Printer Wizard appears.
Click the [Have Disk] button.
Click the [Browse] button.
Specify the desired folder on the CD-ROM that contains the printer driver, and then click the [Open]
button.
–
Select the specified folder according to the printer driver to be used, the operating system, and the
language.
Printer drivers that can be selected:
PCL driver, PS driver, fax driver
–
For details of the built-in CD-ROM construction, see
–
For details on fax drivers, refer to the User's Guide [Fax Driver Operations].
Click the [OK] button.
The "Printers" list appears.
Click the [Next] button.
Follow the on-screen instructions.
–
When the Digital Signature dialog box appears, click the [Yes] button.
Click the [Finish] button.
After installation is completed, make sure that the icon of the installed printer appears in the Printers
window.
Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.
"Contents of CD-ROM" on page
4
1-9.
4-28