Konica Minolta bizhub 751 User Manual page 75

Installation on Macintosh computers
Specifying the TCP/IP setting for the computer
Specify the TCP/IP setting for the Macintosh computer connected to this machine.
1
2
3
4
5
6
Adding a printer
1
2
3
4
5
6
7
IC-208
Downloaded From ManualsPrinter.com Manuals
On the "Apple" menu, select "System Preferences".
Click the "Network" icon.
The Ethernet setting window appears.
– For OS X 10.4, select "Built-in Ethernet", and then click the [Configure] button.
– For OS X 10.5/10.6, select "Ethernet", and then click the [Advanced] button.
Click the TCP/IP tab.
Select "Configure" items according to the settings for the network to which the Macintosh computer is
connected, and then specify the IP address and subnet mask.
Click the close button at the upper left corner of the dialog box.
– When the "This service has unsaved changes" message appears, click the [Apply] button.
On the "Apple" menu, select "System Preferences".
Click the "Print & Fax" icon.
Click [+] in the Print & Fax window.
– If available printers have already been set up, the Add Printer dialog box does not appear.
Click the [IP] button or the [IP Printer] button.
From "Protocol", select "IPP".
In "Address", enter the IP address of this machine. In "Queue", enter "ipp".
– After the printer driver is selected automatically, go to Step 8.
– If an incorrect printer driver is selected, go to Step 7.
Select the desired printer driver manually.
– When OS X 10.4 is used, select "KONICA MINOLTA" in "Print Using", and then select the printer
driver of the desired model name from the list.
– When OS X 10.5 is used, select the "Select a driver to use" from the "Print Using", and then select
the printer driver of the desired model name from the list.
– When OS X 10.6 is used, select "Select printer software" from the "Print Using", and then select the
printer driver of the desired model name from the list that is displayed in another window.
5
5-8