Specifying The Lpr Settings - Konica Minolta bizhub 751 User Manual

Installation on Macintosh computers

Specifying the LPR settings

Specifying the TCP/IP setting for this machine
Specify the IP address of this machine.
!
LPD setting for this machine
To use LPR printing, enable LPD print in the LPD Setting screen of this machine.
!
Specifying the TCP/IP setting for the computer
Specify the TCP/IP setting for the Macintosh computer connected to this machine.
1
2
3
4
5
6
Adding a printer
1
2
3
4
5
6
7
IC-208
Downloaded From ManualsPrinter.com Manuals
Note
If the Installable Options window appears, proceed to change the option settings as necessary. For
details, refer to
"Initializing the printer driver" on page
For OS X 10.4, you can also add a printer by clicking [Add] in the Printer Setup Utility window.
Detail
For details on specifying the IP address of this machine, refer to the User's Guide [Network
Administrator].
Detail
For details on the LPD settings of this machine, refer to the User's Guide [Network Administrator].
On the "Apple" menu, select "System Preferences".
Click the "Network" icon.
The Ethernet setting window appears.
– For OS X 10.4, select "Built-in Ethernet", and then click the [Configure] button.
– For OS X 10.5/10.6, select "Ethernet", and then click the [Advanced] button.
Click the TCP/IP tab.
Select "Configure" items according to the settings for the network to which the Macintosh computer is
connected, and then specify the IP address and subnet mask.
Click the close button at the upper left corner of the dialog box.
– When the "This service has unsaved changes" message appears, click the [Apply] button.
On the "Apple" menu, select "System Preferences".
Click the "Print & Fax" icon.
Click [+] in the Print & Fax window.
– If available printers have already been set up, the Add Printer dialog box does not appear.
Click the [IP] button or the [IP Printer] button.
From "Protocol", select "LPD".
In "Address", enter the IP address of this machine.
– After the printer driver is selected automatically, go to Step 8.
– If an incorrect printer driver is selected, go to Step 7.
Select the desired printer driver manually.
9-4.
5
5-6