Local Connection - Konica Minolta bizhub 751 User Manual

Manual installation using the Add Printer wizard
12
13
14
15
16
17
Once the settings for the printer have been specified, you can use the printer in the same way as a default
local printer. Also, if you set up the printer for sharing in Windows, it can be used as a network printer by other
Windows computers over the network.
4.3.4

Local connection

When this machine is connected via a USB port, the printer driver can be installed with plug-and-play.
1
2
3
4
5
6
7
8
9
10
IC-208
Downloaded From ManualsPrinter.com Manuals
Click the [OK] button.
The "Printer" list appears.
Click the [OK] button.
Follow the on-screen instructions.
– When the "Digital Signature" dialog box appears, click the [Yes] button.
Click the [Finish] button.
When the installation is completed, make sure that the icon of the installed printer appears in the
Printers and Faxes window.
Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.
Note
When a connection is made with the USB port, the local interface kit is required.
Connect this machine to a computer using a USB cable, and then start up the computer.
– Do not disconnect or connect the cable while the computer is starting up.
Insert the Driver CD into the CD-ROM drive of the computer.
Turn on the main power of this machine.
The Found New Hardware Wizard dialog box appears.
– If the Found New Hardware Wizard does not start up, turn off this machine, then on again.
– When turning off the power, then on again, wait at least 10 seconds before turning it on again.
Otherwise, this machine may not function properly.
Select "Search for a suitable driver for my device (recommended)", and then click the [Next] button.
Select "Specify location", and then click the [Next] button.
Specify the desired folder on the CD-ROM that contains the printer driver, and then click the [Open]
button.
– Select the specified folder according to the printer driver to be used, the operating system, and the
language.
Printer drivers that can be selected:
PCL driver, PS driver, fax driver
– For details of the built-in CD-ROM construction, see
– For details on fax drivers, refer to the User's Guide [Fax Driver Operations].
Click the [OK] button, and then follow the on-screen instructions.
– When the "Digital Signature" dialog box appears, click the [Yes] button.
Click the [Finish] button.
When the installation is completed, make sure that the icon of the installed printer appears in the
Printers and Faxes window.
Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.
"Contents of CD-ROM" on page
4
1-9.
4-30