Konica Minolta bizhub 751 User Manual page 80

Installation on Macintosh computers
2
3
4
5
6
Adding a printer
1
2
3
4
5
6
IC-208
Downloaded From ManualsPrinter.com Manuals
Click the "Network" icon.
From "Show", select "Built-in Ethernet".
Click the TCP/IP tab.
Select "Configure" items according to the settings for the network to which the Macintosh computer is
connected, and then specify the IP address and subnet mask.
Click the close button at the upper left corner of the dialog box.
– When the "Apply configuration changes?" message appears, click the [Apply] button.
Select "HDD" - "Applications" - "Utility" where the driver was installed, and then double-click "Printer
Setup Utility" or "Print Center" to open it.
When the Add Printer dialog box appears, click the [Add] button. When the printer list appears, click
the [Add] button.
– If available printers have already been set up, the Add Printer dialog box does not appear.
Select "IP Printing" for the connection method.
For OS 10.3, from "Printer Type", select "IPP".
In "Printer Address", enter the IP address of this machine.
– Leave "Queue Name" blank.
Select "KONICA MINOLTA" in "Printer Model", select the desired model from the list of model names,
and then click the [Add] button.
If the selected printer is registered in the printer list, the setting procedure is completed.
5
5-13