ZyXEL Communications VES1724-56 User Manual page 39

Table 5 Navigation Panel Links (continued)
LINK
Port Setup
Rate Limit Profile
Setup
Hardware Alarm
Profile
VDSL Setup
VDSL Line Setup
VDSL Profile
VDSL Alarm
Profile
Advanced Application
VLAN
Static MAC
Forwarding
Static Multicast
Forwarding
Filtering
Spanning Tree
Protocol
Broadcast Storm
Control
Mirroring
Link Aggregation This link takes you to a screen where you can logically aggregate physical links to
Port
Authentication
MAC Limit
Classifier
Policy Rule
Queuing Method
VLAN Stacking
VES1724-56 User's Guide
DESCRIPTION
This link takes you to a screen where you can configure settings for individual
Switch ports.
This link takes you to screens where you can configure the ingress and egress rate
limit profiles to apply to ports. You can use this setting in the Basic Setting >
Port Setup later.
This link takes you to a screen where you can configure alarm thresholds.
This link takes you to a screen where you can assign a VDSL template, VDSL
fallback template, and VDSL alarm template for each VDSL port.
This link takes you to screens where you can create, modify and delete VDSL
templates, VDSL line profiles, VDSL channel profiles and VDSL INM profiles. A
VDSL template contains a VDSL line profile, a VDSL channel profile and a VDSL
INM profile.
This link takes you to screens where you can create, modify and delete VDSL
alarm templates, VDSL line alarm profiles and VDSL channel alarm profiles. A
VDSL alarm template contains a VDSL line alarm profile and a VDSL channel
alarm profile.
This link takes you to screens where you can configure port-based or 802.1Q
VLAN (depending on what you configured in the Switch Setup menu). You can
also configure a protocol based VLAN, a subnet based VLAN or a MAC based VLAN
in these screens.
This link takes you to a screen where you can configure static MAC addresses for a
port. These static MAC addresses do not age out.
This link takes you to a screen where you can configure static multicast MAC
addresses for port(s). These static multicast MAC addresses do not age out.
This link takes you to a screen to set up filtering rules.
This link takes you to screens where you can configure the RSTP/MRSTP/MSTP to
prevent network loops.
This link takes you to a screen to set up broadcast filters.
This link takes you to screens where you can copy traffic from one port or ports to
another port in order that you can examine the traffic from the first port without
interference.
form one logical, higher-bandwidth link.
This link takes you to a screen where you can configure IEEE 802.1x port
authentication as well as MAC authentication for clients communicating via the
Switch.
This link takes you to a screen where you can activate MAC address learning and
set the maximum number of MAC addresses to learn on a port and/or in a VLAN.
This link takes you to a screen where you can configure the Switch to group
packets based on the specified criteria.
This link takes you to a screen where you can configure the Switch to perform
special treatment on the grouped packets.
This link takes you to a screen where you can configure queuing with associated
queue weights for each port.
This link takes you to a screen where you can configure VLAN stacking.
Chapter 4 The Web Configurator
39