Table of Contents
Advertisement
Chapter 36 DHCP
Note: The port to which the DHCP server connects and the port(s) from which the DHCP
requests come should be in the same VLAN.
Figure 187 IP Application > DHCP > Global > DHCP Relay
The following table describes the labels in this screen.
Table 143 IP Application > DHCP > Global > DHCP Relay
LABEL
Active
Remote DHCP
Server 1 .. 3
Relay Agent
Information
Information
Relay Remote
ID
Remote ID
Information
Apply
Cancel
308
DESCRIPTION
Select this check box to enable DHCP relay.
Enter the IP address of a DHCP server in dotted decimal notation.
Select the Option 82 check box to have the Switch add information (slot number, port
number and VLAN ID) and the Circuit ID and Remote ID sub-options to client DHCP requests
that it relays to a DHCP server.
Select the first option and enter a string of up to 32 ASCII characters that the Switch adds
into the client DHCP requests. Spaces are allowed.
Otherwise, select the second option to have the Switch use the system name you configure in
the General Setup screen.
Select the Remote ID check box to have the Switch add information configured in the
Remote ID Information field to client DHCP requests before the Switch relays them to a
DHCP server.
Select the first option and enter a string of up to 32 ASCII characters for the remote ID
information in this field. Spaces are allowed.
Otherwise, select the second option to have the Switch use the name of the port on which the
DHCP requests are received.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
VES1724-56 User's Guide
Hide quick links:
Advertisement
Table of Contents
