Installation Procedure - Canon iR2030 Series Service Manual

2.5.3 Installation Procedure

1) Turn off the main power switch [1] of the host machine and disconnect the
power plug [2] from the outlet.
2) Remove the rear cover [1].
- Screws, 4 pcs.
3) Remove the screw [1] from the card reader.
MEMO:
The removed screw will be used later.
[1]
4) Remove the screw [1] and the tooth washer securing the ground cable, and
then separate the card reader [3] from the card reader mount [2].
[1]
[2]
[2]
[1]
F-2-35
[1]
F-2-36
F-2-37
[3]
F-2-38
0017-5546
When removing the harness [4] through the opening in the card
reader mount, take care not to cut or damage it.
MEMO:
The removed card reader mount is no longer necessary.
5) Insert the card reader [2] harness and ground cable into the hole in the sup-
plied card reader mount [1]. Using the screw [3] removed in step 1, secure
the card reader to the card reader mount.
When inserting the card reader [2] harness and ground cable to
the hole of card reader mount plate [1], take care not to cut or
damage them.
[3]
[2]
6) Connect the ground cable [2] to the reader mount. Attach the supplied
edge saddle [3] to the card reader mount.
- Supplied binding screw (M4x6) [1], 1pc.
7) Attach the supplied edge saddle [3] to the card reader mount.
[2]
Chapter 2
[4]
F-2-39
[1]
F-2-40
[3]
[1]
F-2-41
2-11