Chapter 9
3) Remove the operation panel unit [1].
- Flat cable [2], 1 pc.
- Screw [3], 2 pcs.
[2]
9.4.5.2 Removing the Operation Panel Unit (Touch Panel
Type)
1) Detach the reader front cover.
2) Turn over the operation panel unit[1].
- Screw [1], 2 pcs.
9-8
[3]
[1]
F-9-28
[2]
[1]
F-9-29
3) Disconnect the flexible cable holder [1] and disconnect the connector [3]
of the flexible cable [2] to remove the operation panel unit [4].
[1]
9.4.6 DC Controller PCB
9.4.6.1 Removing the DC Controller PCB
1) Detach the rear cover.
2) Remove the DC controller PCB [1].
- Connector [2], 16 pcs.
- Screw [3], 4 pcs.
[3]
0017-8660
[3]
9.4.7 Option Power Supply PCB
9.4.7.1 Removing the Option Power Supply PCB
1) Detach the rear cover.
2) Detach the right cover (lower).
3) Detach the delivery tray.
4) Disconnect the connector (J16) [1] on the power supply PCB.
[4]
[2]
[3]
F-9-30
[2]
[2]
[1]
F-9-31
[1]
F-9-32
0017-8661
[3]
[3]
0017-8666