[1]
[2]
9.4.1.7 Reader Front Cover
9.4.1.7.1 Removing the Reader Front Cover
1) Open the copyboard cover (or ADF).
2) Detach the reader front cover [1].
- Screw [2], 2 pcs.
9.4.1.8 Reader Rear Cover
9.4.1.8.1 Removing the Reader Rear Cover
1) Detach the rear cover.
2) Open the front cover.
3) Detach the right cover (lower).
4) Detach the right cover (upper).
5) Detach the left cover (rear).
6) Open the copyboard cover (or ADF).
7) Detach the small cover [1].
- Screw [2], 1 pc.
8) Disconnect the ground cable [1] of the ADF harness.
- Screw [2], 1 pc.
9) Remove the ADF harness [3].
F-9-11
[2]
[1]
F-9-12
[2]
[1]
F-9-13
- Connector [4], 4 pcs.
0017-8622
When installing the ADF harness [3], fit the harness band [5] in the groove
in the reader rear cover.
10) Detach the reader rear cover [1].
- Screw [2], 4 pcs.
9.4.2 Main Drive Assembly
0017-8626
9.4.2.1 Removing the Main Drive Unit
1) Open the front cover.
2) Turn the developing assembly locking lever clockwise to open the left
door.
3) Draw out the drum unit.
4) Detach the rear cover.
5) Detach the left cover (rear).
6) Remove the main motor.
7) Remove the registration clutch.
8) Open the left door fully.
9) Remove the gear unit [1] and gear [2].
- E-ring [3], 1 pc.
[4]
[1]
[5]
[3]
F-9-14
[2]
[1]
F-9-15
[1]
[2]
[3]
F-9-16
Chapter 9
[2]
0017-8627
9-5