Power Supply Unit; Removing The Main Power Supply Pcb; Control Panel; Removing The Operation Panel Unit (Lcd Type) - Canon iR2030 Series Service Manual

3) Detach the left cover (rear).
4) Remove the left door.
5) Remove the fixing unit.
6) Detach the RAM cover.
7) Remove the SDRAM.
8) Detach the LAN cover.
9) Detach the IP cover.
10) Remove the image processor PCB with the PCB mount.
11) Release the claw [1] on the gear cover, and then remove the gear cover
[2] by sliding it in the direction of the arrow.
[2]
12) Release the gear stopper [1], and then remove the gear [2].
[2]
13) Remove the fixing drive unit [1].
- Connector [2], 1 pc.
- Screw [3], 4 pcs.
[3]
[3]

9.4.4 Power Supply Unit

9.4.4.1 Removing the Main Power Supply PCB

1) Detach the rear cover.
2) Detach the right cover (lower).
3) Detach the delivery tray.
[1]
F-9-22
[1]
F-9-23
[1] [3]
[2] [3]
F-9-24
4) Remove the power supply PCB [1].
- Connector [2], 7 pcs.
- Screw [3], 6 pcs.
[3]

9.4.5 Control Panel

9.4.5.1 Removing the Operation Panel Unit (LCD Type)

1) Detach the reader front cover.
2) Detach the left cover [1] of the operation panel unit.
- Screw [2], 2 pcs.
0017-8657
[2]
[3]
[1]
F-9-25
[3]
F-9-26
[2]
[1]
F-9-27
Chapter 9
[3]
0017-8659
9-7