Garp Timer; Switch Setup Screen; Table 5-3 Stp Port States - ZyXEL Communications VES-1000 Series User Manual

VES-1000 Series Ethernet Switch
Age), the bridge assumes that the link to the root bridge is down. This bridge then initiates negotiations with other
bridges to reconfigure the network to re-establish a valid network topology.
5.4.3 STP Port States
STP assigns five port states (see next table) to eliminate packet looping. A bridge port is not allowed to go directly
from blocking state to forwarding state so as to eliminate transient loops.
PORT STATE
Disabled STP is disabled (default).
Blocking Only configuration and management BPDUs are received and processed.
Listening All BPDUs are received and processed.
Learning All BPDUs are received and processed. Information frames are submitted to the learning
process but not forwarded.
Forwarding All BPDUs are received and processed. All information frames are received and forwarded.

5.5 GARP Timer

GARP (Generic Attribute Registration Protocol) allows network devices to register and de-register attribute values
with other GARP participants within a bridged LAN. GARP is a protocol that provides a generic mechanism for
protocols that serve a more specific application, for example, GVRP (GARP VLAN Registration Protocol). GARP
and GVRP are the protocols used to automatically register VLAN membership across switches.
Switches join VLANs by making a declaration. A declaration is made by issuing a Join message using GARP.
Declarations are withdrawn by issuing a Leave message. A Leave All message terminates all registrations. GARP
timers set declaration timeout values.

5.6 Switch Setup Screen

Use the Switch Setup screen to set up and configure the line card's switching features such as IGMP snooping and
priority queues.
Click Switch Setup in the navigation panel to open this screen.
5-4 Getting Started Screens

Table 5-3 STP Port States

DESCRIPTION