Figure 25-1 Igmp Snooping Status; Table 25-2 Igmp Snooping Status - ZyXEL Communications VES-1000 Series User Manual

VES-1000 Series Ethernet Switch
ves-100> ip igmpsnoop status
IGMP Snooping: Enable
inQuery = 30
Group
224.0.0.12
224.0.0.6
224.0.0.5
239.255.255.254 [0074f0f4 0054ad10] [0074b960 0074b960] 0000
224.0.0.9
224.0.1.24
224.0.0.2
239.255.255.250 [0074f8e0 0074ea0c] [0074ba5c 0074b7bc] 0000
224.0.1.60
224.0.1.22
channel swp00 flags 00000000
multicast group:
.
.
.
channel swp12 flags 00000000
multicast group:
224.0.0.12
224.0.0.9
224.0.1.60
channel swp13 flags 00000000
multicast group:
239.255.255.250 224.0.0.9
FIELD
IGMP Snooping
inQuery
inReport
inLeave
Group
groupLink
channLink
Flags
channel
multicast group:
25.1.2 IGMP Snooping Queries
ip igmpsnoop querier
This command displays the incoming channel from which the last query came.
25-2
inReport = 170
groupLink
[0054a934 002a3480] [0074bab0 0074bab0] 0000
[0054ad10 0074f608] [0074ba08 0074ba08] 0000
[0054ac40 0054a934] [0074b9b4 0074b9b4] 0000
[0074f878 0054ac40] [0074b90c 0074b8b8] 0000
[0074ea0c 0074f0f4] [0074b864 0074b864] 0000
[0074ef88 0074f878] [0074b810 0074b810] 0000
[0074f08c 0074ef88] [0074b768 0074b768] 0000
[002a3480 0074f8e0] [0074b714 0074b714] 0000
224.0.0.6
224.0.1.24
224.0.1.22

Figure 25-1 IGMP Snooping Status

Table 25-2 IGMP Snooping Status

This field shows whether IGMP snooping is enabled on the device or not. If enabled, the
device monitors network traffic to determine which hosts want to receive multicast traffic.
This field displays the number of incoming IGMP queries.
This field displays the number of incoming IGMP reports.
This field displays the number of incoming IGMP leave messages.
This is the group multicast IP address.
These fields are for debug purposes only. Send a screen shot of this screen to your
nearest customer support if there are problems with IGMP snooping on your device.
These fields display what multicast groups belong to a channel.
inLeave = 3
channLink
224.0.0.5 239.255.255.254
224.0.0.2 239.255.255.250
DESCRIPTION
flags
IP Commands